86exporter.com Home       Products Catalog      Suppliers Catalog      Log In        Sign up
      About Us
      Profile
      Products
      Contact Us


Silvertech Industrial(H.K)Ltd.

Showing 11 - 17 of 17, total 2 pages        [First] [Previous] [Next] [Last]

11
bearing dismounting toolset tp 150
bearing dismounting toolset tp 150
Specification: 6 sets of extraction arms (A1¨CA6) ¡ö 2 threaded spindles (SW 19)
Detail: The simatool Twin Puller TP 150 can be used to expertly dismount deep groove ball bearings and radial shaft seals. Bearings with a tight fit on the inner or outer ring can be quickly and reliably dismounted with the help of t...

12
deep groove ball bearing extractor tool bp61
deep groove ball bearing extractor tool bp61
Specification: ¡ö 6 sets of puller arms ¡ö 2 spindles ¡ö Practical toolcase (3.2 k
Detail: With the extractor tool BP 61, deep groove ball bearings can be removed from the shaft. It is also equally suited for removing bearings from just a shaft. Even sealed bearings can be dismounted once the seal is removed. The h...

13
ball bearing mounting tool ft33
ball bearing mounting tool ft33
Specification: Case contents: ¡ö 33 impact rings made of nylon ¡ö 3 aluminum impa
Detail: Incorrect mounting, and especially falsely estimated mounting forces, are responsible for approx. 16% of all premature bearing breakdowns. The ball bearing installation tool FT 33 guarantees the fast, precise and secure instal...

14
induction heater ih 090
induction heater ih 090
Specification: For rolling bearings weighing up to 150kg
Detail: ¡ö For rolling bearings weighing up to 150kg ¡ö For workpieces with inner diameter of 20 to 400mm ¡ö Also included: 3 yokes, 1 swivel arm, 1 temperature probe, 1 pair of protective gloves ¡ö Available for voltages of 200, ...

15
induction heater ih 070
induction heater ih 070
Specification: For rolling bearings weighing up to 120kg
Detail: ¡ö For rolling bearings weighing up to 120kg ¡ö For workpieces with inner diameter of 20 to 400mm ¡ö Also included: 3 yokes, 1 temperature probe, 1 pair of protective gloves ¡ö Available for voltages of 100, 115 and 230V ...

16
induction heater ih 025 volcano
induction heater ih 025 volcano
Specification: For workpieces weighing up to 10kg
Detail: ¡ö For workpieces weighing up to 10kg ¡ö For workpieces with a minimum inner diameter of 20mm up to a maximum outer diameter of 160mm ¡ö Also included: 1 temperature probe, 1 pair of protective gloves, 1 carrying case ¡ö A...

17
induction heater ih070
induction heater ih070
Specification: 1 box
Detail: Operating voltage: 230V/16A/50HZ/3.7KVA single phase Working limits: inner diameter - Minimum 20mm Max 400mm Thickness Max 145mm Weight Max 80kg Temperature control range: 0 degrees C-250 degrees C, error + + 3 C Maximum ...
Showing 11 - 17 of 17, total 2 pages        [First] [Previous] [Next] [Last]
1 2 


Copyright© Silvertech Industrial(H.K)Ltd. All Rights Reserved.
Tel : 852 24999168 Fax : 852 24179183
Powered by 86exporter.com